SF2 CCR Accessories

Here you will find some of the available SF2 rebreather accessories, spares and consumable parts. For servicing and sales please contact your local Instructor / dealer for prices and availability. 

 

SF2 Oxygen Sensor

User replaceable Oxygen sensor for the SF2 ECCR.

SF2 Calibration kit

The calibration kit is designed to ensure efficient and accurate calibration of the SF2 sensors. This can either be connected to an on or off-board Oxygen supply for calibration.

LP Inline Shut off

The inline shut of can be used with the SF2 manual add valve kit, the sidemount rebreather or to isolate gas supply to either the ADV or the solenoid.

SF2 loop hose protector

The cordura Breathing hose covers are designed to give that little extra protection for the rubber breathing hoses,

SF2 rebreather travel Bag

This custom made travel bag has been especially designed to carry the complete SF2 back mount or sidmount rebreathers. It is fitted with bumper foam for extra protection and is light weight to avoid adding extra trial weight.

Sidemount Conversion Kit

The sidemount conversion kit is designed to allow the diver who already owns the backmount system an easy switch to the sidemount configuration.

Included in the kit are the following items:
Lower carbon section for sidemount
Breathing loop and Sidemount DSV
QC hose system feed for diluent and O2
O2 injection MAV
Sidemount head Plate

Backmount Conversion Kit

The backmount conversion kit is designed to allow the diver who already owns the sidemount system an easy switch to the backmount configuration.

Included in the kit are the following items:
Lower carbon section for back mount with fixed cylinder clamps and single tank adaptor
Breathing loop and DSV
QC hose system feed for diluent and O2
MAV mid section LP fitting

SF2 Rebreather frame

The rebreather frame was designed to allow divers the ability to add larger cylinders and allows for a quick assemble of either the sidemount or back mount rebreather carbon base section.

ScubaForce Standard Backplate

The ScubaForce Standard stainless steel Backplate has material thickness of 0.12” and has a total weight of 5.07 lbs (2.3kg). It is made of saltwater resistant stainless steel. Holes in regularly spaced intervals that enable you to fix your Argon-Set or other accessories without any problems.

Black Devil Skeleton Backplate Long

This backplate is about 5.91”longer than similar backplates. The difference; the supporting point lays on he haunches. The optimised division of forces enables you to wear extremely heavy devices easily.
Weight: 8lbs 6oz
Material: Stainless steel 0.16” (4mm), powder coated.
Optimised division of forces:
-Expanded width compared to similar backplates
-Innovative shape offers an optimised division of forces as well as an improved wearing comfort. (Also applicable for double tank configurations).
-Centre of gravity is close to body axis which allows stowage of heavy P-weights.

Black Devil Skeleton Backplate

The ScubaForce Black Devil Skeleton Backplate combines design with a maximum of convenience. Its shape is directly inspired by high quality backpacks.
Weight: 5lbs 1oz (2.3kg)
Material: Stainless steel 0.12” (3mm), powder-coated.

The Black Devil Skeleton Backplate is also available in 0.16” (4mm) stainless steel.
Weight: 6lbs 13oz, powder-coated.
Optimised division of forces:
-Expanded width compared to similar backplates
-Innovative shape offers an optimised division of forces as well as an improved wearing comfort. (Also applicable for double tank configurations).
-Centre of gravity is close to body axis which allows stowage of heavy P-weights.

ScubaForce Aluminium Backplate

The ScubaForce Aluminium Backplate has a material thickness of 0.12” (3mm) and a total weight of 1.76lbs (0.8kg). Thanks to its minimal weight it is your ideal companion. It is especially suitable for traveling by plane. The hole pattern on the backplate allows you to secure your equipment for the optimal position and security.

ScubaForce Cobra Harness Sport

The ScubaForce Cobra Harness, This harness is comfortable and a safe companion for all divers who don't settle for the “standard” single webbed harness.

Cobra buckles
-Hard anodized aluminium buckles
-Patented safety mechanism
-Offers you an easy entry and exit
-Unintentional quick discount prevention.

Crotch strap
-Width 1.969” (50mm)
-Soft material for comfort comfortable

-Excellent hold without equipment hindrance
-Front and rear crotch D-rings
-The harness can be adjusted and positioned in a few seconds

ScubaForce Cobra Harness (Tec)

Convenience and safety are just a couple of advantages of the ScubaForce Cobra Harness Tec. Designed for the needs of ambitious technical diver, with one hand the safety mechanism is simple to use while preventing unintentional release.

Cobra buckle
-Hard anodized aluminium buckles
-Patented safety mechanism
-Offers you an easy entry and exit
-Unintentional quick discount prevention.
-Installation on left and right side possible
-Individual positioning of the height

Crotch strap
-Width 1.969” (50mm)
-High comfort, soft material
-Two integrated D-rings
-Excellent hold without equipment hindrance
-Front and rear crotch D-rings
-The harness can be adjusted and positioned in a few seconds

Manual Add Off Board Gas Kit (Over The Shoulder)

Manual control of the SF2 ECCR. The delrin add valves use a LP inflator button to allow the diver the ability to add gas to the rebreather as they require a low profile easy to service component with the ability to plug in off-board gasses for technical dives.
Redundancy by separate systems (oxygen/diluent).

SF2 backplate / trim weight

The weight block is available in two weights 2.7 kg and 4.9 KG.